Page: 30 from 38
. The picture size will be enlarged.
This option is useful when you view a movie.
when connected to a PC.
when connected to an AV device.
If you connect a PC using a HDMI-DVI cable, set to
― This function does not support
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor is in
mode and the screen says
Check Signal Cable
or power saving mode activates,
press the JOG button to display the function-button screen and then select the
icon. You can select
as the method to recognize input signal.
Key Repeat Time
can be selected. If
is selected, a command responds only once when a
button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
: The power LED is on when the product is turned on.
: The power LED is on when the product is turned off.
Return all the settings for the product to the default factory settings.
View the current input source, frequency and resolution.
**kHz **Hz NN
― The displayed image may differ depending on the model.