Страница: 17 из 32
Chapter 6. ThinkServer Remote Management Module Web
This section describes every page of Web console and each page is divided into several parts corresponding
separately to the several tabs at the left side of the pane. In each part, there are detail illustrations and
introductions of each menu option in the left of the pane.
• The first menu item of each tab is default page which will automatically appear when selecting the
• Click the HELP button on the right horizontal toolbar, and the Web console will show the relevant
information of each page.
By default, the home page of ThinkServer Remote Management Module shows the Properties page
including general information of the server.
This page provides the following server information:
Customizable product name.
Customizable product description.
Firmware version information.
Date and Time of building BMC Firmware.
The server’s platform.
The Configuration page is used to configure Network Setting, Users Setting, Update, etc.
The Network Settings page is used to configure the Network Settings. It includes the following options:
• Automatic (Obtain an IP address automatically): Automatically obtain the IP address (use DHCP).
• Manual (Use the following IP addresses): Manually configure IP address.
You can configure the Network settings by click ncsi0 item.
The MAC address of the devices (Read Only)
If you want to configure the IP by IPv4 protocol, enable
the IPv4, and set the IP address.
If you want to configure the IP by IPv6 protocol, enable
the IPv6, and set the IP address.
When you enable virtual LAN, you have to set the VLAN
ID, Priority also.
© Copyright Lenovo 2011