Installing Windows printing system software for direct connections Laserjet printer HP Серия принтеров HP Color LaserJet CP4005

Page: 26 from 282

background image

Preconfiguration, information technology (IT) administrators can preconfigure the printing and device
defaults for HP printer drivers before installing the drivers in the network environment. For more
information, see the HP Driver Preconfiguration Support Guide, which is available at 

http://www.hp.com/

support/ljcp4005

 and 

http://www.hp.com/hpdpc_se

Installing the printing system software

The following sections contain instructions for installing the printing system software.

The printer comes with printing system software and printer drivers on a CD-ROM. The printing system
software on the CD-ROM must be installed to take full advantage of the printer features.

If you do not have access to a CD-ROM drive, you can download the printing system software from the
Internet at 

http://www.hp.com/support/ljcp4005

.

NOTE

You can obtain Model Scripts for Linux by downloading them from the Internet. For Linux

support see 

http://www.hp.com/go/ljcp4005_software

.

You can download the latest software free of charge at 

http://www.hp.com/go/ljcp4005

.

Installing Windows printing system software for direct connections

This section explains how to install the printing system software for Microsoft Windows 2000 and
Windows XP.

When installing the printing software in a direct-connect environment, always install the software before
connecting the USB cable. If the USB cable was connected before the software installation, see 

Installing

the software after the USB cable has been connected

.

Use a USB cable for the direct connection. Use a standard 2 meter (6 foot) USB cable.

Installing the printing system software

1.

Close all software programs that are open or running.

2.

Insert the printer CD-ROM into the CD-ROM drive.

If the welcome screen does not open, start it by using the following procedure:

On the Start menu, click Run.

Type the following: X:\setup (where X is the letter of the CD-ROM drive).

Click OK.

3.

When prompted, click Install and follow the instructions on the computer screen.

4.

Click Finish when the installation has completed.

5.

You might need to restart the computer.

6.

Print a Test Page or a page from any software program to make sure that the software is correctly
installed.

If installation fails, reinstall the software. If this fails, check the installation notes and readme files on the
printer CD-ROM or the flyer that came in the printer box, or go to 

http://www.hp.com/support/ljcp4005

for help or more information.

10

Chapter 1   Printer basics

ENWW