Loading custom-sized media into Tray 2 and optional Tray 3 Laserjet printer HP Серия принтеров HP Color LaserJet CP4005

Page: 110 from 282

background image

3.

Load media into the tray face up.

NOTE

For best performance, load the tray completely full without splitting or fanning the

ream of paper. Splitting or fanning the ream might cause a multi-feed problem, which could
result in a paper jam. The capacity of the paper tray can vary. For example, if you are using
75 g/m

2

 (20 lb) paper, the tray holds a full ream of 500 sheets. If the media is heavier than

75 g/m

2

 (20 lb), the tray will not hold a full ream, and you must reduce the number of sheets

accordingly. Do not overfill the tray because the printer might not pick up the paper.

NOTE

If you are duplex printing, see 

Two-sided (duplex) printing

 for loading instructions.

4.

Slide the media width guides in making sure that they gently touch the paper. Insert the tray into
the printer.

5.

Insert the tray into the printer. The printer will display the tray’s type and size configuration. To
specify custom dimensions, or if the type is not correct, press   and follow the prompts. To enter
specific dimensions or change the size selection from ANY CUSTOM to custom, see 

Configuring

a tray to match print job settings

.

6.

If the configuration is correct, press   to clear the message.

94

Chapter 4   Printing tasks

ENWW