Page: 101 from 282
Press or to highlight the correct paper type.
Press to select the correct paper type.
A Setting saved message appears, and then the current type and size settings are displayed.
Configuring Tray 2 and optional Tray 3 for a custom paper size
The printer automatically detects many sizes of paper, but you can also configure trays for custom paper
sizes. You must specify the following parameters:
Unit of measure (millimeters or inches)
X dimension (the width of the page as it feeds into the printer)
Y dimension (the length of the page as it feeds into the printer)
Media width guides
Media length guides
Page width (X dimension)
Page length (Y dimension)
Use the following procedure to configure a tray for a custom size. Once a custom size is set for a tray,
it will be retained until the media length guides are reset.
Setting a custom size in Tray 2 or optional Tray 3
Open the tray and place the media face-up in the tray.
Set the media length guides to the appropriate non-standard position and close the tray.
When the tray configuration message appears, press .
Press to change ANY CUSTOM to custom.
Press to select custom.
Press or to highlight the correct unit (either millimeters or inches).
Configuring input trays