Installing/replacing the fax accessory in the HP LaserJet M9040 MFP / M9050 MFP Laserjet printer HP Серия мультифункциональных принтеров HP LaserJet 9040 и 9050

Page: 41 from 148

background image

6.

Remove the fax accessory from its antistatic pouch.

The fax accessory contains parts that are sensitive to electrostatic discharge (ESD). When
removing the fax accessory from its antistatic pouch and while installing it, use static protection,
such as a grounding wrist strap that is connected to the metal frame of the MFP, or touch the metal
frame of the MFP with your other hand.

7.

Align the fax accessory with the two guides. Make sure that the connector pins are aligned, and
then push the fax accessory into place. Make sure that the fax accessory is securely connected to
the formatter.

Figure 1-48

  Inserting the fax accessory

8.

Slide the formatter board back into the MFP and tighten the two screws.

Figure 1-49

  Inserting the formatter

ENWW

Installing the fax accessory

33