Installing/replacing the fax accessory in the HP LaserJet M5025 MFP and M5035 MFP Laserjet printer HP Серия мультифункциональных принтеров HP LaserJet 9040 и 9050

Page: 29 from 148

background image

4.

If necessary, remove the plastic fax-accessory cover from the formatter. Insert a coin into the
groove at the top of the cover, and then pry the cover away from the formatter.

5.

Open the formatter-cage door by grasping the metal tab and pulling the door open.

6.

If you are replacing an existing fax accessory, unplug the fax cable and remove the accessory from
the device.

7.

Remove the new fax accessory from the antistatic pouch.

CAUTION:

The fax accessory contains parts that are sensitive to electrostatic discharge (ESD).

When handling the fax accessory, use static protection such as a grounding wrist strap that is
connected to the metal frame of the device, or touch the metal frame of the device with your other
hand.

CAUTION:

When handling the fax accessory, do not press the yellow component on the card.

Doing so can damage the card and cause a fax malfunction.

ENWW

Installing the fax accessory

21