Page: 96 from 154
Position the computer with the rear toward you.
Support the display assembly when removing the display screws in the following
steps. Failure to support the display assembly can result in damage to the assembly and other
Remove the four Torx M2.5x7.0 screws (1) that secure the display hinges to the base
Remove the four Torx M2.5x3.0 screws (2) that secure the hinge cover to the base
Remove the display assembly (3) from the base enclosure.
If it is necessary to replace the display hinge cover:
Rotate the display hinge cover (1) around the display assembly cables.
Chapter 4 Removal and replacement procedures