Page: 46 from 154
Removal and replacement procedures
Preliminary replacement requirements
You will need the following tools to complete the removal and replacement procedures:
Phillips P0 and P1 screwdrivers
Torx T8 screwdriver
5.0 mm hex socket driver
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance
Chapter 4 Removal and replacement procedures