Restoring factory settings in Computer Setup Laptop elitebook HP Мобильная рабочая станция HP EliteBook 8760w

Page: 121 from 154

background image

To exit Computer Setup menus, choose one of the following methods:

To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left
corner of the screen, and then follow the on-screen instructions.

– or –

Use the tab key and the arrow keys to select File > Ignore changes and exit, and then press

enter

.

– or –

To save your changes and exit Computer Setup menus, click the Save icon in the lower-left
corner of the screen, and then follow the on-screen instructions.

– or –

Use the tab key and the arrow keys to select File > Save changes and exit, and then press

enter

.

Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE:

Restoring defaults will not change the hard drive mode.

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

1.

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

2.

Press 

f10

 to enter BIOS Setup.

3.

Use a pointing device or the arrow keys to select File > Restore defaults.

4.

Follow the on-screen instructions.

5.

To save your changes and exit, click the Save icon in the lower-right corner of the screen, and
then follow the on-screen instructions.

– or –

Use the arrow keys to select File > Save changes and exit, and then press 

enter

.

Your changes go into effect when the computer restarts.

NOTE:

Your password settings and security settings are not changed when you restore the factory

settings.

Windows Vista and Windows 7 113