System board Laptop elitebook HP Мобильная рабочая станция HP EliteBook 8760w

Page: 116 from 154

background image

2.

Remove the power connector cable jack (2) from the base enclosure.

Reverse this procedure to install the Power connector cable.

System board

NOTE:

All system board spare part kits include replacement thermal material.

NOTE:

Models that support quad-core processors have four memory slots. Models that support

dual-core processors have two memory slots.

Description

Spare part number

For use in all countries and regions except the People's Republic of China and Russia:

For use with computer models equipped with Intel quad-core processors

652509-001

For use with computer models equipped with Intel dual-core processors

652508-001

For use only in the People's Republic of China and Russia:

For use with computer models equipped with Intel quad-core processors

655025-001

For use with computer models equipped with Intel dual-core processors

655024-001

Before removing the system board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 45

).

108 Chapter 4   Removal and replacement procedures