Page: 114 from 154
Network cable and jack
The network cable is included in the Cable Kit, spare part number 652545-001.
Before removing the network cable, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the service access cover (see
Remove the keyboard (see
Remove the top cover (see
Remove the display assembly (see
Remove the fan/graphics board heat sink (see
Remove the network cable:
Disconnect the network cable (1) from the system board.
Flex the sideband (2).
Remove the two Phillips M2.0x3.0 screws (3) that secure the sideband to the base enclosure.
106 Chapter 4 Removal and replacement procedures