Bluetooth module cable Laptop elitebook HP Мобильная рабочая станция HP EliteBook 8760w

Page: 112 from 154

background image

5.

Remove the card reader/USB 3.0 board (3) to the right away from the base enclosure.

Reverse this procedure to install the card reader/USB 3.0 board.

Bluetooth module cable

NOTE:

The Bluetooth module cable is included in the Cable Kit, spare part number 652545-001.

Before removing the Bluetooth module cable, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 45

).

5.

Remove the service access cover (see 

Service access cover on page 46

).

6.

Remove the optical drive (see 

Optical drive on page 58

) or upgrade bay hard drive (see 

Upgrade

bay hard drive on page 60

).

7.

Remove the keyboard (see 

Keyboard on page 65

).

8.

Remove the top cover (see 

Top cover on page 81

).

9.

Remove the card reader/USB 3.0 board (see 

Card reader/USB 3.0 board on page 103

).

Remove the Bluetooth module cable:

1.

Position the computer right-side up with the front toward you.

2.

Disconnect the Bluetooth cable (1) from the system board.

104 Chapter 4   Removal and replacement procedures