Card reader/USB 3.0 board Laptop elitebook HP Мобильная рабочая станция HP EliteBook 8760w

Page: 111 from 154

background image

Card reader/USB 3.0 board

Description

Spare part number

Card reader/USB 3.0 board

652514-001

Before removing the card reader/USB 3.0 board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 45

).

5.

Remove the service access cover (see 

Service access cover on page 46

).

6.

Remove the optical drive (see 

Optical drive on page 58

) or upgrade bay hard drive (see 

Upgrade

bay hard drive on page 60

).

7.

Remove the keyboard (see 

Keyboard on page 65

).

8.

Remove the top cover (see 

Top cover on page 81

).

Remove the card reader/USB 3.0 board:

1.

Position the computer right-side up with the front toward you.

2.

Remove any plastic blanks in the card reader slots.

3.

Remove the three Phillips M2.5x3.0 screws (1) that secure the card reader/USB 3.0 board to the
base enclosure.

4.

Lift the right side (2) of the card reader/USB 3.0 board to disconnect it from the system board.

Component replacement procedures 103