Page: 109 from 154
Modem module cable
The modem module cable is included in the Cable Kit, spare part number 652545-001.
Before removing the modem module cable, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the service access cover (see
Remove the keyboard (see
Remove the top cover (see
Remove the Smart Card reader (see
Remove the Audio/USB 2.0 board (see
Remove the modem module (see
Remove the modem module cable:
Position the computer right side-up with the front toward you.
Remove the modem cable (1) from the routing clips in the base enclosure.
Loosen the Torx M2.0x3.0 screw (2).
Component replacement procedures 101