Audio/USB 2.0 board Laptop elitebook HP Мобильная рабочая станция HP EliteBook 8760w

Page: 104 from 154

background image

7.

Remove the keyboard (see 

Keyboard on page 65

).

8.

Remove the top cover (see 

Top cover on page 81

).

Remove the fingerprint reader:

1.

Position the top cover upside down with the front toward you.

2.

Peel off the tape (1) that secures the fingerprint reader to the top cover.

3.

Lift the fingerprint reader (2) from the top cover.

4.

Slide the fingerprint reader cable (3) out from the clips in the top cover.

5.

Remove the fingerprint reader (4).

Reverse this procedure to install the fingerprint reader.

Audio/USB 2.0 board

Description

Spare part number

Audio/USB 2.0 board

652517-001

Before removing the Audio/USB 2.0 board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 45

),

5.

Remove the service access cover (see 

Service access cover on page 46

).

6.

Remove the optical drive (see 

Optical drive on page 58

) or upgrade bay hard drive (see 

Upgrade

bay hard drive on page 60

).

96

Chapter 4   Removal and replacement procedures