WLAN module Laptop chromebook HP HP Chromebook 13 G1

Page: 29 from 48

background image

WLAN module

Description

Spare part number

Intel Dual Band Wireless-AC 7265NV 802.11 ac 2×2 WiFi + Bluetooth 4.0 Combo Adapter

793840-005

CAUTION:

To prevent an unresponsive system, replace the wireless module only with a wireless module 

authorized for use in the computer by the governmental agency that regulates wireless devices in your 
country or region. If you replace the module and then receive a warning message, remove the module to 
restore device functionality, and then contact technical support.

Before removing the WLAN module, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the two computer feet and base enclosure (see 

Computer feet and base enclosure on page 19

).

5.

Remove the battery (see 

Battery on page 21

).

6.

Remove the heat sink (see 

Heat sink on page 21

).

Remove the WLAN module:

1.

Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

NOTE:

The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1." 

The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2." 

2.

Remove the Phillips screw (2) that secures the WLAN module to the base enclosure. (The WLAN module 
tilts up.)

Component replacement procedures

23