Computer feet and base enclosure Laptop chromebook HP HP Chromebook 13 G1

Page: 25 from 48

background image

5

Removal and replacement procedures

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider. 

Accessing these parts can damage the computer or void the warranty.

NOTE:

HP continually improves and changes product parts. For complete and current information on 

supported parts this your computer, go to 

http://partsurfer.hp.com

, select your country or region, and then 

follow the on-screen instructions.

Component replacement procedures

There are as many as 54 screws that must be removed, replaced, and/or loosened when servicing 
the computer. Make special note of each screw size and location during removal and replacement.

Computer feet and base enclosure

Description

Spare part number

Computer feet (included in the rubber kit)

861673–001

Base enclosure

859526–001

Before replacing the computer feet and base enclosure, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer .

Remove the computer feet:

1.

Close the computer and position it upside down, with the front toward you.

2.

Insert a tool (1) with no sharp edges between the base enclosure and one end of the rubber feet.

3.

Pull up the rubber feet (2) lightly and quickly.

Component replacement procedures

19