Page: 25 from 28
The Setting menu is used for adjusting the general settings for current input signal such
as aspect ratio, OSD language, and etc.
1 Press the Menu button to bring up the OSD menu.
2 Press the
button to select
Setting and press the Menu button to enter the
The following options are available in the Setting menu: Wide Mode, DDC/CI, OD,
Input, Language, Auto Source ,Quick Start Mode and Reset.
3 Press the
button to scroll through the Setting options, and press the Menu
button to enter its sub-menu.
4 Press the
button to adjust/select the setting and press the Auto button to
Auto Sourc e
uic k Start Mode
5 Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect, and 1:1.
6 DDC/CI: Allows the monitor settings to be set through the software on the PC.
7 OD: Select Off, Normal, or Extreme.
8 ACM: Turn ACM on or off. The default is off.
9 Input: Select the source from VGA,DVI, HDMI.
10 Language: Set the OSD menu language.
11 Auto Source:The default is “On”, can support auto search for signal source in order.
12 Quick start mode: Select Off or On. The default is “Off”. Turn on to speed up boot
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.