Troubleshooting H series Acer H6519ABD

Page: 43 from 63

background image

33

English

OSD Messages

Problems with the Projector

#

Condition

Message Reminder

1

Message

Fan Fail - the system fan is not working.

Projector Overheated - the projector has exceeded its 
recommended operating temperature and must be allowed 

to cool down before it may be used. Please check the 

following message. 

Please also check the dust filters if they are installed. If the 

dust filter is clogged with dust, please clean it. Please refer to 

"Cleaning and replacing the dust filters" for details.

Replace the lamp - the lamp is about to reach its maximum 
lifetime. Prepare to replace it soon.

#

Condition

Solution

1

The projector stops responding 

to all controls

If possible, turn off the projector, then 

unplug the power cord and wait at least 30 

seconds before reconnecting power.

2

Lamp burns out or makes a 

popping sound

When the lamp reaches the end of its useful 

life, it will burn out and may make a loud 

popping sound. If this happens, the projector 

will not turn on until the lamp module has 

been replaced. To replace the lamp, follow 

the procedures in the "Replacing the Lamp" 

section.