Page: 41 from 63
Press "RESYNC" on the control panel.
For an incorrectly displayed image:
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4],
NEC [Fn]+[F3], Toshiba [Fn]+[F5]
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
The screen of the
computer is not
If you are using a Microsoft
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
If you are using an Apple
notebook: In System Preferences, open Display and
select Video Mirroring "On".
Image is unstable
Adjust the "Tracking" to correct it. Refer to the
"Image" section for more information.
Change the display color depth settings on your
Image has vertical
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
Check and reconfigure the display mode of your
graphics card to make it compatible with the
Image is out of
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 3.3 to 38.8 feet (1.0 to 11.8
meters) (SVGA/XGA series) / 3.3 to 32.7 feet (1.0 to
10.0 meters) (WXGA series) / 3.3 to 32.2 feet (1.0 to
9.8 meters) (1080p series) from the projector. Refer
adjusting distance and zoom" section for more