Page: 48 from 68
Image is too small
or too large
Adjust the zoom ring on the projector.
Move the projector closer to or further from the
Press "MENU" on the remote control. Go to "Image -
-> Aspect Ratio" and try different settings or press
"RATIO" on the remote control to adjust directly.
Image has slanted
If possible, reposition the projector so that it is
centered on the screen.
Press the "Keystone / " button on the remote
control until the sides are vertical.
Image is reversed
Select "Image --> Projection Mode" on the OSD and
adjust the projection direction.