Management H series Acer H6510BD Plus

Page: 43 from 68

background image

33

English

Note1: Functions vary depending on model definition.

Note2: Internal 5V not applicable for type 2 series.

Management

Note: Functions vary depending on model definition.

Administrator Password
The "Administrator Password" can be used in both the "Enter 

Administrator Password" and "Enter Password" dialog boxes.

Press "ENTER" to change the "Administrator Password".

The factory default of "Administrator Password" is "1234".

If you forgot your administrator password, do the following to 

retrieve the administrator password:

An unique 6-digit "Universal Password" which is printed on 

the Security Card (please check accessory in the box). This 

unique password is the number which will be accepted by 

projector anytime no matter what the Administrator 

Password is.

If losing this security card and number, please contact with an 

Acer service center.

Lock to user startup screen
Default Lock User Startup Screen is "Off". If lock user startup screen 

is "On", users cannot change startup screen anymore and avoid 

other users change that arbitrarily. Choose "Off" to unlock startup 

screen.

ECO Mode

Choose "On" to dim the projector lamp which will lower power 

consumption, extend the lamp life and reduce noise. Choose "Off" 

to return normal mode.

High Altitude

Choose "On" to turn on High Altitude mode. Operate the fans at 

full speed continuously to allow for proper high altitude cooling of 

the projector.

Turn Off Mode

Instant Off: Shuts down the projector without fan cooling.

Instant Resume: Resumes the system when the Power button 
is pressed again within 2 minutes.

Auto Shutdown

The projector will automatically shutdown when there is no signal 

input after the allocated time. (default is 15 minutes)

Menu Display Time 

(Seconds)

Choose the OSD menu display time. (Default is 15 seconds). Select 

“Manual” to turn off main menu/one direct-key menu manually by 

user.

AC Power On

Choose "On" to power on projector while AC power plug in.

Lamp Hour Elapse

Displays the lamp’s elapsed operating time (in hours).

Lamp Reminding

Activate this function to display a reminder to change the lamp 30 

hours before its expected end-of-life.

Lamp Hour Reset

Press the "ENTER" button and choose "Yes" to turn the lamp hour 

counter to 0 hours.