Setting H series Acer H6510BD Plus

Page: 41 from 68

background image




Startup Screen

Use this function to select your desired startup screen. If you 

change the setting, the changes will take effect when you exit the 

OSD menu.

Acer: The default startup screen of your Acer projector.

User: Use memorize picture from "Screen Capture" function.

Screen Capture 

Use this function to customize the startup screen. To capture the 

image that you want to use as the startup screen, follow the 

instructions below.


Before proceeding with the following steps, make sure that the 

"Keystone" is set to the default value 0.

Press "Screen Capture" to customize the startup screen.

Pop message to suggest user to input native source. The 

"resolution" shown in the text is based on native timing. Press 

"Start" to go next UI; press "Back" to previous UI .

A dialog box appears to confirm the action. Show a message: 

Adjust the picture size to fit in the red frame and system will 

capture your image after pressing "ENTER". Choose "ENTER" 

to use the current image as your customized startup screen. 

Choose "Back" to cancel the screen capture and exit the 

onscreen display (OSD).

A message appears, stating that the screen capture is in 


When the screen capture is finished, the message disappears 

and the original display is shown.

The customized startup screen takes effect when there is a new 

input signal or when you restart the projector.

Source Lock

When Source Lock is turned "Off", the projector will search for 

other signals if the current input signal is lost. When Source Lock is 

turned "On", it will "lock" the current source channel unless you 

press "Source" button on the remote control for the next channel.

Closed Caption

Selects a preferred closed captioning mode from CC1, CC2, CC3, 

CC4, (CC1 displays captions in the primary language in your area).

Select "Off" to turn off the captioning feature. This function is only 

available when a composite video or S-Video input signal is 

selected and its system format is NTSC.

<Note> Set your screen aspect ratio to 4:3. This function is not 

available when the aspect ratio is "16:9" or "Auto" .

DC 5V Out

(Type 1 series)

Default is "On". Choose "Off" to Disable DC 5V OUT connection.


1. DC 5V Out is not supported while in standby mode.

2. That two or about of MHL, Internal 5V, DC 5V Out port supply 

power are not supported. And, MHL is at the top priority if three of 

them are occupied, and grays out DC 5V Out (OSD) & Internal 5V 

(OSD) while MHL enables.

3. DC 5V Out (OSD) sets to off automatically while Internal 5V 

(OSD) switches to On, and vice versa.

DC 5V Out

(Type 2 series)

Default is "On". Choose "Off" to Disable DC 5V OUT connection.


1. If users want to use the "PgUp" or "PgDn" buttons, change "DC 

5V Out" from "On" to "Off".

2. 5V/1A power output if MHL source is not detected.

Warning! The DC 5V Out may happen power conflict if connecting 

to PC and result in electric shock and/or injury.

3. DC 5V Out is not supported while in standby mode.