Page: 20 from 28
To install the monitor on your host system, please follow the steps below:
Connect the video cable
Make sure both the monitor and computer are switched off.
Connect the VGA video cable to the computer.
Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI cable to the back of the
monitor and the other end to the computer's port.
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor
and the line-out port on the computer with the audio cable.